Inter-M - V2 5000 Power Anfi

Continuous Average Output Power Per Channel

Stereo Mode (1kHz, Both Channels Driven)

8Ω (T.H.D 1%): 1000W

4Ω (T.H.D 1%): 1700W

2Ω (T.H.D 1%): 2500W

Bridged Mono Mode

8Ω (T.H.D 1%): 3400W

4Ω (T.H.D 1%): 5000W

Input Sensitivity (Rated Output Power @4Ω): 1.4V

Voltage Gain (Rated Output Power @4Ω): 36dB

Frequency Response (1W @8Ω)

20Hz~20kHz: ±0.3dB

- 3dB point: 5Hz~70kHz

Damping Factor (100Hz, Rated Output Power @8Ω): more than 400

T.H.D (20Hz~20kHz, 10dB Below Rated Output Power @4Ω): less than 0.05%

Channel Separation (1kHz, 3dB Below Rated Output Power @8Ω): less than -70dB

Residual Noise: less than -70dB

Signal to Noise Ratio (Rated Output Power @8Ω, 20Hz~20kHz): 106dB

Output Circuitry: 2 Step Class H

Input Impedance: 12 kΩ Balanced

HPF (30Hz/50Hz): 12dB/oct

Indicators: Prot/Clip, Signal, Power

Protection Circuitry: Full Short Circuit, Thermal Protection Power ON/OFF Muting, DC Output Protection

Cooling: Variable Speed Fans, Front to Rear Air Flow

Connectors: Input : XLR(Female), 1/4″TRS, 3-PIN EUROBLOCK Output : 4 Pole Speaker Socket

Operating Temperature/Humidity: Temperature : -10°C ~ +40°C / Humidity : 0% ~ 90%

Power Source: 120VAC 60Hz

Power Consumption: (1/8 Rated output power @4Ω) 16A

Weight (SET): 12.8kg / 28.2lb

Dimensions (SET): 482(W) x 88(H) x 407(D)mm / 19(W) x 3.5(H) x 16(D)in